MF-0.5The type of electromagnetic gas safety valve is a kind of cut-off device, which is indispensable for the safety of various industrial furnaces and kilns using gas as fuel. The electromagnetic gas safety valve is a flange connected, lever type open and close valve. It is mainly composed of electromagnet, lever device, spring and hammer, valve body, valve plate and shaft. When the pressure of gas or auxiliary gas air is in normal state, the safety valve is in full open position. When the gas or combustion air is low pressure, through the corresponding circuit design, electromagnet can be used at a specified low pressure When the power is lost, the lever will lose balance, the lever connected to the safety valve will trip, the heavy hammer will fall, and the safety valve will be closed immediately. In addition, when the power supply of the gas is cut off or the power supply of the gas supply system is cut off immediately, the same purpose can be achieved when the power supply of the gas is cut off or the electric combustion valve is cut off immediately. The valve has simple structure, reliable action, convenient maintenance, low price, and has the following functions: low pressure gas and air alarm, fast cut-off when power off, always point valve position signal, etc.

Nominal pressure PN: 0.05Mpa
Leakage: zero leakage
Power supply voltage: 220 v.ac50 Hz
Temperature range: - 20 ～ 180 ℃
Cut off time: < 1.5s

Note: 1. The valve is matched with dck-1 type brake. Please indicate if the user needs, and the user can also design the control circuit by himself.
2. Please indicate: voltage, temperature and pressure of electromagnetic starter, and special requirements such as explosion-proof and outdoor.