Telephone:
0577-67975099
Location:Home > Product Center > control valve > Hydraulic automatic control valve
The hydraulic automatic valve can be used at the outlet of centrifugal pump, which has the functions of check-in, light load start-up, elimination of water hammer and flow regulation, which can effectively protect the safety of water pump and pipe network equipment; the valve opening can be observed on site, with remote digital display; at the same time, it can output 4-20mA DC current for centralized computer control.
The hydraulic automatic valve can be used at the outlet of centrifugal pump, which has the functions of check-in, light load start-up, elimination of water hammer and flow regulation, which can effectively protect the safety of water pump and pipe network equipment; the valve opening can be observed on site, with remote digital display; at the same time, it can output 4-20mA DC current for centralized computer control.
1. It has the functions of check-in, light load start-up, elimination of water hammer and so on.
2. The opening and closing of the valve is driven by the conveying medium and is automatically interlocked with the water pump, so it is very convenient to operate without personnel and external force.
3. Slowly open the pump: after starting the pump, the valve can only be opened after the inlet pressure of the valve reaches the preset value, which can reduce the pump starting current and ensure the safety of the motor and electronic control system
4. The energy saving effect is remarkable: the opening and closing parts are inclined butterfly plate, the water flow is smooth, and the loss along the way and local loss is very small
5. The structure of butterfly valve has the characteristics of small volume and light weight, small space occupation and low civil engineering cost; the electro-hydraulic control system of hydraulic butterfly valve is cancelled to reduce cost, increase reliability and stability, reduce power consumption, and achieve the purpose of energy saving.
Serial number | Items | Parameters |
1 |
Valve name | Hydraulic automatic valve |
2 |
Nominal diameter(mm) |
DN150-DN3000 |
3 |
Nominal pressure(MPa) |
0.6-6.4 |
4 |
Applicable temperature(℃) |
0~80 |
5 |
Applicable media | Clean water, sewage, raw water, oil, etc |
6 |
Shell test pressure |
1.5PN |
7 |
Sealing test pressure |
1.1PN |
8 |
Minimum operating pressure |
≥0.05MPa |
9 |
Design flow rate |
1.5-3.0 m/s |
10 |
Slow opening time | 1-50 seconds adjustable |
11 |
Slow closing time | 3-150 seconds adjustable |
12 |
Fast closing time | 1-2 seconds |
13 |
Water hammer peak |
≤1.5倍水泵出口额定压力 |
14 |
Resistance loss |
≤0.03MPa |
Serial number | Items | Parameters |
1 |
Valve name | |
2 |
Nominal diameter(mm) |
DN150-DN3000 |
3 |
Nominal pressure(MPa) |
0.6-6.4 |
4 |
Applicable temperature(℃) |
0~80 |
5 |
Applicable media | Clean water, sewage, raw water, oil, etc |
Shell test pressure |
1.5PN |
|
7 |
Sealing test pressure | |
8 |
Minimum operating pressure |
≥0.05MPa |
9 |
Design flow rate |
1.5-3.0 m/s |
10 |
Slow opening time | 1-50 seconds adjustable |
11 |
Slow closing time | 3-150 seconds adjustable |
12 |
Fast closing time | 1-2 seconds |
13 |
Water hammer peak |
≤1.5 times the rated pressure of water pump outlet |
14 |
Resistance loss |
≤0.03MPa |
自动水力控制阀进出口压力推荐及防.....
Maintenance Manu.....
V-type ball valve is a kind of.....蝶阀常见的试验和安装及故障排除方.....
1、本产品无论是手动、气动、液动、电动各部件在出厂前均经严.....管力阀八大技术特点分析
管力阀八大技术特点分析旋球阀产品概述
旋球阀结合球阀的优越密 封性能与蝶阀的优势结构性能研发而成,.....常用球阀等产品所执行的国家标准解.....
《通用阀门法兰和对焊连接钢制球阀》GB/T12237-89 .....管力阀是一种什么样的阀门
管力阀是我公司历时五年研发的zui新水泵出口控制阀,是继老.....调流调压阀焊接技术要求
调流调压阀是一种多功能活塞式调节阀、该产品有活塞式、套筒式、.....Fast Navigation
Product Line
Recommended Products
Technical Support
Copyright:Shangou Valve Co.,Ltd Record No:; Sitemap
Friendship Links: SenAu Product website