KP-10The quick exhaust valve (quick suction valve) is reasonable in design, simple in structure, small in volume and large in displacement. Our factory has made a lot of improvement on the original basis to make KP type more perfect, and the qualified rate of products can reach 100%.

   KP-10Quick exhaust valve (quick suction valve), When the water enters the pipe, the floating ball stops at the bottom of the ball barrel for a large amount of exhaust. When the gas is exhausted, the water enters the valve and floats the ball up and closes to stop exhaust. When the pipeline is in normal operation, a small amount of gas will naturally be generated. These gases will be concentrated in the upper part of the pipe to a certain extent. The water and ball in the valve will drop at any time, and the gas will queue up from no limit.

1. Medium: clear water
2. Service temperature: normal temperature
3. Valve body: gray cast iron HT200
4. Float and plug: stainless steel
5. Sealing material, nitrile rubber
6. Pressure test for valve body strength, 1.5MPa
7. Sealing test pressure 0.05-1.1mpa

Nominal diameter （DN）	D	D1	D2	D3	H	Z-фd
25	115	85	65	140	285	4-14
50	160	125	102	200	340	4-14
80	195	160	135	230	490	4-18
100	215	180	158	250	545	4-18
150	280	240	212	300	615	8-23
200	335	295	268	380	730	8-23

Statement: all words, data and pictures in this paper are only for reference. Please contact us for more details of kp-10 quick exhaust (suction) valve performance parameters, structure size parameters, price, etc., or require high-quality printing samples.