Telephone:
0577-67975099
Location:Home > Product Center > Globe Valve > CARX Compound exhaust valve
CARXThe valve body of the composite exhaust valve is barrel shaped, and the valve internals include stainless steel floating ball, lever and disc. The valve is installed at the pump outlet or in the water supply and distribution pipeline to remove the air accumulated in the pipe, so as to improve the use efficiency of the pipeline and the water pump. Once the negative pressure is generated in the pipe, the valve quickly sucks in the outside air to prevent the pipeline from being damaged due to the negative pressure.
The valve body is barrel shaped, and the valve internals include stainless steel floating ball, lever and disc. The valve is installed at the pump outlet or in the water supply and distribution pipeline to remove the air accumulated in the pipe, so as to improve the use efficiency of the pipeline and the water pump. Once the negative pressure is generated in the pipe, the valve quickly sucks in the outside air to prevent the pipeline from being damaged due to the negative pressure.
When the water injection starts in the pipe, the valve disc is in the open position for a large amount of exhaust. When the air is exhausted, the valve is filled with water, and the floating ball rises and drives the valve disc to close and stop exhaust. When the water in the pipe is normally transported, if a small amount of air accumulates in the valve to a certain extent, the water level in the valve will drop, and the floating ball will drop, and the air will be discharged from the small hole. When the water pump stops, the water flow in the pipe is empty or negative pressure is generated in the pipe. At this time, the plug is opened quickly to inhale air to ensure the safety of the pipeline.
Part name | valve body | Valve cover | Floating ball | Lever frame | lever | Stopper |
Material Science | Cast steel, gray iron, ductile iron | Gray iron, ductile iron | stainless steel | stainless steel | Aluminum bronze | Aluminum bronze |
Specifications
DN |
25 |
50 |
80 |
100 |
150 |
200 |
250 |
300 |
350 |
400 |
M3 / h |
2-88 |
85-352 |
22-904 |
34-1414 |
76-3179 |
135-8831 |
212-8831 |
305-12717 |
415-17309 |
542-22608 |
Nominal diameter(DN) |
H |
L |
L1 |
20/25 |
400 |
290 |
180 |
50 |
480 |
370 |
200 |
80 |
600 |
420 |
250 |
100 |
600 |
420 |
250 |
150 |
750 |
600 |
350 |
200 |
870 |
670 |
410 |
常用阀门材料允许使用压力明细介绍
常用阀门材料允许使用压力明细说明。常用阀门材质国家标准代号分类
常用阀门材质国家标准代号分类有那些,上欧为您做准确说明,请参.....What is the name.....
The name of the organization t.....Main technical r.....
The main technical requirement.....Bill of material.....
1: Screw plug: Bronze / stainl.....Set up a new ben.....
Full flow streamline design, t.....General technica.....
The adjustment of piston type .....Fast Navigation
Product Line
Recommended Products
Technical Support
Copyright:Shangou Valve Co.,Ltd Record No:; Sitemap
Friendship Links: SenAu Product website